plastic mold making product produce factory


Side Gate

Side Gate Side Gate Side Gate

Product name:Side Gate




  Different products with different templates. Side Gate system,as "mold base with single parting face",has a dimension rang from 150mm*150mm(1515 series) to 600mm*800mm(6080 series). In this system, A plate, B plate,stripper plate and support plate can vary, forming four combinations, namely A,B C and D, Acoording to the different stuctures of clamping slot,it can be further divided into 3 categories. I type, H type and T type. Therefore, in total there are 12 models available in this system. The system offers a choice of different plate thickness to suit designers' application requirements.
  Moulds using side gate system are ooften called two plate molds. Runners and gates are designed in a way that they are on the same parting line. Mold design is simple, with low tooling cost and short lead time, making side gate system a favourite within the mold making industry. There are two disadvantages with two plate mold designs _ obvious gate mark on product and need to separate running from product.


Related Products :
Pin-piont Gate System
Pin-piont Gate System

online service

Skype: yytefl.bob 点击这里给我发消息